Why won't my pilot light light on my gas fireplace?

1
Eldora Stiedemann asked a question: Why won't my pilot light light on my gas fireplace?
Asked By: Eldora Stiedemann
Date created: Fri, Apr 30, 2021 4:41 AM
Date updated: Thu, May 26, 2022 10:40 AM

Content

Top best answers to the question «Why won't my pilot light light on my gas fireplace»

If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple… The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

FAQ

Those who are looking for an answer to the question «Why won't my pilot light light on my gas fireplace?» often ask the following questions:

👉 Lighting pilot light on gas fireplace?

How to Light a Gas Fireplace Pilot Light

  • Getting Started. Remove the decorative cover of the fireplace to reveal the gas controls at the bottom of the unit, near the floor.
  • Turning it On. Locate the gas control knob…
  • Lighting Up. Now comes the part that makes the gas fireplace so convenient, lighting the flame that will hopefully stay on for as long as needed.
  • Keep in Mind…

👉 How to light your gas fireplace pilot light?

  • Using a long match or long-barreled lighter, press and hold down the gas control knob with the lit match or lighter until the pilot lights. The pilot should start immediately once the flame is close enough. Once the pilot is lit, hold the button down for about 20 seconds until the thermocouple has time to heat up.

👉 Should i leave pilot light gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Your Answer

We've handpicked 21 related questions for you, similar to «Why won't my pilot light light on my gas fireplace?» so you can surely find the answer!

Do you leave the pilot light on a gas fireplace?

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Do you need a pilot light for a gas fireplace?
  • Newer generations of gas fireplaces use an electronic ignition system, requiring electricity to start up. In the event of a power outage, though, these fireplaces will work on battery back-up so you’ll stay toasty warm! Electronic ignition fireplaces save you the cost of running a pilot light 24/7, usually about $8 to $10 a month.
How does a pilot light work on a gas fireplace?
  • With the gas on, push in and hold the pilot valve while igniting the pilot light. Once the pilot is lit, hold the pilot valve in for 60 seconds. This allows the pilot flame to heat the thermocouple attached to the log. After 60 seconds release the pilot valve and turn the log’s operating valve “on” making sure you are clear of the log.
How to turn down the pilot light on gas fireplace?

Lighting the pilot on a gas fireplace.For Your Safety, Read Before Lighting:A. This fireplace has a pilot which must be lit manually. When lighting the pilot...

How to turn on gas fireplace pilot light is off?

Turning off your pilot light is a simple process that will save you both energy and money. All you have to do is open the front of your fireplace, turn the Pilot knob to “off,” and then turn your gas shutoff valve to the “off” position as well.

Is it ok to leave pilot light on gas fireplace?

Located in North Texas, our team can answer any queries you may have regarding your gas fireplace. How much gas does a pilot light use? Should you turn your pilot off during summers? How much gas does a pilot light require? Most pilot lights consume around 600 BTUs of gas every hour. If you leave your pilot light on for an entire day, it would roughly consume 14,400 BTU’s every day.

Is it safe to keep pilot light on gas fireplace?

Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.

Is it safe to turn off gas fireplace pilot light?

Your Utility Bill Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill. Also, Do pilot lights waste gas?

Where is the pilot light located on a gas fireplace?
  • If your furnace has a pilot light, you can find it by locating the gas valve and following the two smaller tubes attached to it to their termination points. To locate the pilot light on a gas furnace, you first have to remove the access cover, which usually just lifts off.
Where is the pilot light on an old gas fireplace?

This is usually located on the front of the fireplace wall. For standard systems, you'll see two knobs: the hi/lo knob and the pilot knob. The hi/lo knob is used to adjust the flame after the pilot is lit.

Why you should turn off your gas fireplace pilot light?

If you are not planning on using it during the summer, then turning off the pilot light will save you a surprising amount of gas. Someone I know has a propane fireplace in their house with a large propane tank outside. At the end of winter one year they had the propane tank refilled.

How big should a pilot light be on a gas fireplace?

A pilot flame should be blue with a yellow tip and strong enough to cover 1/2 inch at the end of the thermocouple tip. If the flame is too strong and adjusted wrong, it will be noisy and cause improper furnace operation.

How do you adjust the pilot light on a gas fireplace?
  • Light the gas logs by turning the control knob to the "pilot" setting. Rotate the knob to the left and push in to allow gas to flow to the pilot light.
How do you reset the pilot light on a gas fireplace?

Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. If you do this correctly, the pilot light should start as soon as the flame is close enough. Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it.

How high should the pilot light be on a gas fireplace?

A proper pilot flame should be blue with a yellow tip and should be strong enough to cover about 1/2 inch at the end of the thermocouple tip.

How to light the pilot on vent free gas log fireplace?
  • How To Light The Pilot On A Vent Free Gas Log Fireplace And Other Helpful Tips. Make sure your main gas supply is ON. From OFF position, turn gas control knob (reads OFF, ON & PILOT) counterclockwise to PILOT position. Push in knob (this releases the gas to the pilot area only).
Is it dangerous if pilot light goes out on gas fireplace?

A small flow of gas powers the pilot light – just enough to maintain a flame. When a pilot light goes out on a gas fireplace, there is cause for concern if the gas flow hasn't been interrupted… One thing to check is the gas valve on the fireplace and make sure it's open.

Should i keep the pilot light burning on a gas fireplace?

While leaving the pilot light on may be convenient, the continuous flow of gas may pose a safety hazard. Homes with smaller children may want to consider the potential for injury before opting to keep the pilot light burning. Added to the potential hazard is the constant consumption of fuel to maintain the pilot light.

Should the pilot light always be on in a gas fireplace?

Save Energy and Money

We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.

Should you turn off the pilot light on a gas fireplace?

To save money, some people will turn off their gas feed between uses, thereby turning off their pilot light. The downside to this, of course, is that you will need to manually relight your pilot every time you want to use your fireplace.

How do you turn on the pilot light on a gas fireplace?
  1. Turn the knob from the “Off” to the “Pilot” position.
  2. Push in the pilot knob, which manually sends gas into the system.
  3. Push the igniter button once every second until it lights.