What to do when electric starter on gas stove malfunctions?

Josie Hettinger asked a question: What to do when electric starter on gas stove malfunctions?
Asked By: Josie Hettinger
Date created: Mon, Apr 26, 2021 8:09 AM
Date updated: Thu, Jun 23, 2022 3:31 PM


Top best answers to the question «What to do when electric starter on gas stove malfunctions»

What should I do if my gas stove burner is not working?

  • Place the wires in a new switch. Slide the new switch onto the burner valve. Replace the knob, and turn on the gas supply and power. Ignite the burner. Follow the switch wires into the oven if the new switch doesn't work. Locate the module box, which is usually 2 inches by 3 inches.

4 other answers

Pull the burner dials off the front of the unit if the ignitors won't work. Step 4 Remove the screws at the ends of the front cover, where the gas supply knobs are located, using a screwdriver, and remove the cover from the oven. Step 5

Pull the stove from the wall, if necessary, to reach the valve. Turn the valve off. This valve stops the flow of gas to the stove for added safety during troubleshooting. Locate the malfunctioning...

If the gas doesn't ignite, contact a technician to check the gas line to the burner. If the burner ignites, turn off the knob and proceed with adjusting the igniter. Loosen the small hex-head...

Viking stove ranges use an electrical ignition system to light gas coming out of the burner. Turning the gas control knobs at the front of the unit to the "light" setting causes the electric ignition to create a spark. The spark ignites the gas. An ignitor that keeps clicking might not create the spark necessary for ignition. Replacing the ignitor or the ignition switch at the front of the stove may be necessary to repair the issue.

Your Answer