What does a density in a gas depends on?

12
Burley Rempel asked a question: What does a density in a gas depends on?
Asked By: Burley Rempel
Date created: Fri, Jan 29, 2021 6:58 PM
Date updated: Fri, May 27, 2022 4:42 PM

Content

Video answer: The number density of molecules of a gas depends on their…

The number density of molecules of a gas depends on their…

Top best answers to the question «What does a density in a gas depends on»

  • Since gases all occupy the same volume on a per mole basis, the density of a particular gas is dependent on its molar mass. A gas with a small molar mass will have a lower density than a gas with a large molar mass. Gas densities are typically reported in g/L. Gas density can be calculated from molar mass and molar volume.

FAQ

Those who are looking for an answer to the question «What does a density in a gas depends on?» often ask the following questions:

👉 Electric force depends on what?

Electric Field strength is given by: E = F e/q' (this was discovered experimentally.) • Where q' (C) is the test charge in the field • F e is the Electrical Force exerted of the test charge by the source charge • E is the Electric field strength There is another way to define the Force on one charge by another charge.

👉 Does gas have a density?

Gas Density. An important property of any gas is its density… But for gases, the density can vary over a wide range because the molecules are free to move. Air at the surface of the earth has a very different density than air 50 kilometers above the earth.

👉 What is electric flux density?

Flux is the integrated electric field over an area, while flux density is the flux per unit area, which is the electric field by definition. The units are the only thing that ends up being different. The one thing that will drive you crazy about physics is that sometimes, things are referred to by many names.

Video answer: The velocity of sound in a gas depends on its pressure and…

The velocity of sound in a gas depends on its pressure and…

11 other answers

The density of gases depends on temperature and pressure.

Answer: The density of gases depends upon the temperature. The higher the temperature, the more the molecules are spread out and the lower the density as shown in the graphic on the left. The result is that warm gases rise and cool gases sink. High pressure means high density, cooler, sinking air.

Since density is defined to be the mass divided by the volume, density depends directly on the size of the container in which a fixed mass of gas is confined. As a simple example, consider Case #1 on our figure. We have 26 molecules of a mythical gas. Each molecule has a mass of 20 grams (.02 kilograms), so the mass of this gas is.52 kg.

Correspondingly what does the density of a gas depend on? The density of gases depends upon the temperature. The higher the temperature, the more the molecules are spread out and the lower the density as shown in the graphic on the left. The result is that warm gases rise and cool gases sink. The same concept helps to explain the weather resulting in high and low pressures. Read full answer ...

That's how does density or a gas depends on temperature and all those different pressure and others depend, depend on more than mass of a gas. So no, that's, uh, dance. This must be ratified. Okay, so how goes the density of the gases and some of temperature from the simple can etiquette jury of gas? We know that, uh, volume, yes, that's directly proportional at your temperature. Right on ...

How does the density of a gas depend on temperature? Pressur... Get solutions . We have solutions for your book! Chapter: Problem: FS show all show all steps. How does the density of a gas depend on temperature? Pressure? How does it depend on the molar mass of the gas? Step-by-step solution: 89 %(19 ratings) for this solution. Chapter: Problem: FS show all show all steps. Chapter , Problem is ...

The rate of a heterogeneous reaction (as iron (solid) any oxygen gas) does not depend on: On which factors does the average KE of gas molecules depend : nature of gas, its temperature , its ... Hydrogen diffuses six times faster than the gas A.

How does the density of a gas depend on temperature? Pressure? How does it depend on the molar mass of the gas? 🎉 Announcing Numerade's $26M Series A, led by IDG Capital!Read how Numerade will revolutionize STEM Learning. Books; Test Prep; Bootcamps; Class; Earn Money; Log in ; Join for Free. Problem What is partial pressure? What is the relationshi… View Full Video. Already have an ...

Density is the mass of any material per unit volume. Gases always have much lower density than the condensed phases. Most materials have a lower density of the liquid than the solid but this isn't always true. Water has a higher density in the liquid state than the solid, so ice cubes float.

The vapour density of a gas depend upon the: A. total number of electron in the molecules. B. total numbers of neutrons in the molecules. C. total number of molecules. D. molecular mass of gas. Medium. Answer. Correct option is . A. total number of electron in the molecules. Vapour density of gas = w e i g h t o f × m o l e c u l e s o f h y d r o g e n w e i g h t o f × m o l e c u l e o f ...

What happens to the density if the temperature and pressure of an ideal gas are doubled. The pressure of an ideal gas is directly proportional to its pressure. This means you take a can of gas, double its temperature, and the pressure doubles. SO you have the same amount of gas in the same volume, so the density is unchanged.

Your Answer

We've handpicked 27 related questions for you, similar to «What does a density in a gas depends on?» so you can surely find the answer!

What affects the density of a gas?

The density of gases depends upon the temperature. The higher the temperature, the more the molecules are spread out and the lower the density as shown in the graphic on the left. The result is that warm gases rise and cool gases sink. The same concept helps to explain the weather resulting in high and low pressures.

What is the density of ideal gas?

Answer: The density of an ideal gas of 50 g/mol at 2 atmospheres and 27 °C is 4.06 g/L.

What is the density of liquid methane?
  • On Earth, liquid methane density 422.62 g·L−1 (liquid, −162 °C), which is 0.422 g/cm³.
What is the density of natural gas?

Natural gas is lighter than air (density of air is 1.293 kg/Sm3, density of natural gas is 0.68 kg/Sm3); consequently it rises quickly in air. It ignites at a temperature between 595 and 630 °C.

What current density writes the vector equation showing relation between current density and electric field intensity?

Write the vector equation connecting current density J with electric field intensity E, for an ohmic conductor. Current density: It is defined as the electric current per unit cross sectional area (area normal to current) at any point in a conductor… = 4.608 x lO-19 Joule.

Video answer: The vapor density of a gas depends upon the

The vapor density of a gas depends upon the What is the density of a gas equation?
  • The density is determined by utilizing a variation of the ideal gas law where density and molar mass replace moles and volume. The original ideal gas law uses the formula PV = nRT, the density version of the ideal gas law is PM = dRT, where P is pressure measured in atmospheres (atm),...
What is the density of a gas extractor?
  • Class C gas has a density of 100. Placing a gas extractor yields 250 per cycle. Class B gas has a density of 200. Placing a gas extractor yields 500 per cycle. Class A gas has a density of 300. Placing a gas extractor yields 750 per cycle. Class S gas has a density of 400. Placing a gas extractor yields 1000 per cycle.

Video answer: Density of a gas calculation using the ideal gas law (& molar…

Density of a gas calculation using the ideal gas law (& molar… What is the density of methane at stp?
  • Methane (density 0.716 g/L at STP, average molecular mass 16.04 g/mol), the main component of natural gas, is sometimes used as a lift gas when hydrogen and helium are not available.
What is the ideal gas law for density?
  • The Ideal Gas Law is an equation of state for a gas, which describes the relationships among the four variables temperature (T), pressure (P), volume (V), and moles of gas (n). One modified form of the Ideal Gas equation is to involve the density (d) and molecular weight (M) instead of volume (V) and moles (n).
What is the power density of methane fuel?
  • The operation of Ni–YSZ anode supported SOFCs on methane fuel is described. Power densities as high as 0.52 W/cm 2 at 700 °C and 1.27 W/cm 2 at 800 °C were observed. Open circuit voltages (OCV) increased with increasing temperature to nearly 1.2 V, in good agreement with equilibrium calculations.

Video answer: Density of an ideal gas

Density of an ideal gas Do gases have high density?

Gases typically have exceptionally low densities.

How to measure gas density?

How do you determine the density of a gas?

  • To calculate the density of a gas at standard temperature and pressure, you take the molecular formula weight of the gas (grams per mole—from the periodic table) and divide that by the standard molar volume for a gas, which is 22.4 L per mole: where the formula weight (FW) is in g/mol, and the standard molar volume is 22.4 L/mol.
Does natural gas have a higher energy density than gasoline?

Compared to gasoline and diesel, other options may have more energy per unit weight, but none have more energy per unit volume… Natural gas, either in liquefied form (LNG) or compressed (CNG), are lighter than gasoline but again have lower densities per unit volume.

Are electric cars greener depends on where you live?

But whether electric cars are actually greener depends on where the electricity comes from. Our research, along with other studies, finds that electric cars are not necessarily the environmentally friendly choice when it comes to the emissions of carbon dioxide — the pollutant of greatest concern for climate change.

What is the density of a sample of gas?
  • A sample of gas has a density of 0.53 g/L at 225 K and under a pressure of 108.8 kPa.
What is the density of any gas at stp?

A. Density of a gas at STP. The formula D= M/V is used at STP with M being equal to the molar mass and V being molar volume of a gas (22.4 liter/mole).

What is the density of c2h2 gas at stp?

The density can be calculated in the following way: molar mass of ANY gas (g)/1 mol/22.4L=density of gas. The molar volumes of different solids and liquids are not uniformly the same at any prescribed conditions. The density of acetylene at STP is 1.17 g/L.

What is the density of helium gas at stp?
Helium
Phase at STPgas
Melting point0.95 K ​(−272.20 °C, ​−457.96 °F) (at 2.5 MPa)
Boiling point4.222 K ​(−268.928 °C, ​−452.070 °F)
Density (at STP)0.1786 g/L

Video answer: Kinetic molecular theory of gases

Kinetic molecular theory of gases What is the density of nh3 gas at stp?
  • Atomic, Ionic, and Molecular Solids. Solution: The density of liquid NH3 is 0.64 g/mL; the density of gaseous NH3 at STP is 0.0007 g/mL. Explain the difference between the densities of these two phases.
What is the formula for the density of gases?
  • The formula of the density of the gas is the same as the formula that we use to calculate the density of liquids and solids. That is: \\rho ρ ' is the density of gas, letter 'm' is the mass of the object, and 'V' is the volume of the gas.
When gas is compressed what happens to the density?

By the above, we can say that when volume decreases, density increases. Therefore, when a gas is compressed its density increases.

How do you calculate gas density?
  • To calculate the density of a gas at standard temperature and pressure, you take the molecular formula weight of the gas (grams per mole—from the periodic table) and divide that by the standard molar volume for a gas, which is 22.4 L per mole: where the formula weight (FW) is in g/mol, and the standard molar volume is 22.4 L/mol.
Why is the density of gas?

As you know, density is defined as the mass per unit volume of a substance. Since gases all occupy the same volume on a per mole basis, the density of a particular gas is dependent on its molar mass. A gas with a small molar mass will have a lower density than a gas with a large molar mass.

Video answer: Density of an ideal gas, examples 3,4…

Density of an ideal gas, examples 3,4…