Is there an abator for anprolene gas sterilisation?

8
Francesco Bosco asked a question: Is there an abator for anprolene gas sterilisation?
Asked By: Francesco Bosco
Date created: Thu, Jul 15, 2021 10:51 PM
Date updated: Wed, Jun 22, 2022 2:04 PM

Content

Video answer: Anprolene an74: how to operate

Anprolene an74: how to operate

Top best answers to the question «Is there an abator for anprolene gas sterilisation»

  • Anprolene sterilisation cycles are designed to be the gentlest available, allowing repeated sterilisation whilst preserving medical devices in pristine condition. An optional abator is available to comply with local requirements on EtO emissions.

Video answer: Overview of the anprolene sterilization system

Overview of the anprolene sterilization system

7 other answers

AN-87 - Dosimeters for Anprolene. The Andersen Dosimeters are chemical integrators that provide the operator with an immediate visual assurance that the requirements for sterilisation have been fulfilled. Provided the load has seen sufficient EtO, for long enough, at a high enough temperature, the blue line will go past the blue triangle mark.

Abator. In certain Countries or Regions local authorities will require an Abotor attached to the exhaust to reduce any EtO emissions. The abator is easy to install and comes with a cartridge that is good for 200 cycles. Go to Product description page

The AN5100.11 Abator is designed for use with Anprolene AN74i, AN74ix, AN74j, AN2000 or EOGas Series 4 model sterilisers. The vent hose from the steriliser connects to the abator which is vented to the outside of the building for extra safety. Disposable Abator Refill Cartridge

Scrub your emissions 99% free of ethylene oxide gas! The Replaceable Cartridge Abator is designed to remove more than 99% of the ethylene oxide emitted from upto 200 ampoules. Installation is simple, as the abator attaches easily to Anprolene or EOGas 4 model sterilizers.*. Ethylene oxide emissions are regulated in many parts of the world.

Anprolene Features Abator Features Wall W al l nc the future of gas sterilisation Ref:- Series 3 Abator Flyer 201602a 3 Effec ve Removal of Ethylene Oxide Emissions The AN5200.11 Abator is designed for use with AN306, AN310 and AN333 EOGas Series 3 sterilisers. The vent hose from the steriliser connects to the abator which is vented to the

AN5100 EO Abator. The AN5100 Abator is designed to remove 99% ethylene oxide emitted from the exhaust stream of an Anprolene or EOGas 4 sterilizer. Installation is simple, as the abator easily attaches to most new* AN74i, AN74ix, AN74j or EOGas 4 model sterilizers. The emissions from ethylene oxide are regulated in many parts of the country.

Our Anprolene sterilizers have the most delicate 100% EO sterilization cycle on the market. Room temperature sterilization, no steam injection, no deep vacuum, and uses only 17.6 g of gas – all in a convenient tabletop cabinet. “Interacting with the sales team, we’ve had great response time. Typically, we get a response within an hour ...

Your Answer