How high should the saddle be on an electric guitar?

Elvera Keebler asked a question: How high should the saddle be on an electric guitar?
Asked By: Elvera Keebler
Date created: Thu, Apr 8, 2021 9:50 AM
Date updated: Thu, Jun 23, 2022 10:36 AM


Top best answers to the question «How high should the saddle be on an electric guitar»

For electric guitars, in our opinion, a good default string height at the 12th fret is typically about 6/64th of an inch (2.38mm) on the bass side and 4/64th of an inch (1.59mm) on the treble side.

6 other answers

A compensated saddle with an elevation for high E and B strings helps normalize the effective string length and helps the guitar sound in tune with notes played higher up the fretboard. The high B string is often the one to get most compensation, as it’s quite a thick plain-steel string and needs a bit more length compared to its neighbors.

How to Adjust String Height (Electric Guitar or Bass) Changing the string height can have a drastic affect on the feel and functionality of the guitar. If the strings are too high, the instrument is a chore to play. If they are too low, they may produce too much buzz and a lack of sustain.

Turn the screw clockwise to raise the saddle; turn it counter-clockwise to lower the saddle. If the saddle has two hex screws, be sure to turn them the same amount so that the saddle stays level. The following figure shows the location of the hex screws. You can also use the saddles to adjust the intonation of your guitar.

Let's say you like 4/64ths above the 12th fret. Just use your rule and adjust the saddles so that the bottom of the string rests on top of the 4/64ths mark on the rule, going from E to E, all on the 12th fret.

The average string action of the guitars I set up is 3/32 inches on the bass side and 1/16 inches on the treble side. It is important to note that to change your action height at the 12th fret a certain distance, you must multiply that number by two to find the height to raise it at the saddle.

A good, average action height for most electric guitars is about 1/16” on the high E string, and 3/32” on the low E string. The decimal equivalent of these would be.062” and.093” The metric equivalent of these would be 1.6mm and 2.4mm Remember that these measurements are just a starting point!

Your Answer