How high electric fence for deer?

Emmanuel Schinner asked a question: How high electric fence for deer?
Asked By: Emmanuel Schinner
Date created: Mon, May 17, 2021 10:43 AM
Date updated: Fri, Jun 24, 2022 1:47 AM


Top best answers to the question «How high electric fence for deer»

When deer encounter an electric fence, they are less likely to jump over it or crawl under it if they have alternative avenues to avoid the fence. So building the fence 6-8 ft. away from a forest provides deer space to maneuver when they suddenly receive a shock.

9 other answers

The minimum height recommended for woven wire deer fences is 15 feet high. In-line fence posts should be set into the ground 3 to 4 feet deep, with corner bracing posts set even deeper. Only the highest quality materials should be used.

White-tailed deer can jump almost eight feet high, so effective upright fences against them should be this high. Deer may be able to jump high, but not both high and over a distance. So a fence may not be as high, perhaps six feet, but slanted outward. The deer will try walking under the fence and meet resistance.

For this reason, the perfect deer fence height is between 7.5'-8' tall. These heights ensure that deer will not jump over the fence and into the garden. Deer will always try to walk the perimeter, then dig underneath the fence, before attempting the jump.

Here's how an electric deer fence works: An electric fence converts battery or solar power into high voltage pulses. The electric fence energizer than transfers the pulse to a fence insulator that will give the deer the 'shock.' This usually transfers a response in less than 3 seconds.

A volt meter will allow you to test your electric fence and ensure it is working properly. Generally speaking your fence will need to run at 5,000-6,000 volts for deer, which you can check using your volt meter. Best results will come from a volt meter made by the same manufacturer as the energizer.

A double fence just 3-4 foot high separated by 3 feet kept the deer out of our garden. I understand that the 3 foot is just that they can't jump into or over. We used a nice woven metal fence for the inside and use it for the climbing veggies. Yep, that's what the slant fence does, too.

Take a 2 to 3 foot wire and run it through the glass donut insulator, fixing it to a corner post. Take the 14-gauge high tensile wire and tie its end to the insulator. Start wrapping the wire around the donut, making sure the wire touches only its glass part. Step 2 - Wrap the Wire. Unroll the high tensile wire along the perimeter that will be enclosed.

The first one starts at a mere 6 inches off the ground and the top wire is suspended 42 inches above the ground. If you’re running an electric fence to contain poultry, it’s another matter altogether though. These differences are important since a fence built for one animal may be ineffective for other species.

With an electric fence, current is supplied by a high-voltage charger, which provides regularly timed pulses—55 to 65 per minute—followed by approximately one second with no current flow. These short-duration, high-energy pulses provide sufficient voltage (greater than 4,000 volts) to keep deer away from the fence.

Your Answer