How does electric window motor works on 04 tahoe?

8
Dena Collier asked a question: How does electric window motor works on 04 tahoe?
Asked By: Dena Collier
Date created: Thu, Jan 28, 2021 9:34 PM
Date updated: Thu, Jun 23, 2022 4:20 AM

Content

Top best answers to the question «How does electric window motor works on 04 tahoe»

How does a power window work on a Chevy Tahoe?

  • The motor transforms the electrical energy sent to it from the window switch into kinetic energy it uses to turn a gear on the window regulator, which moves the window itself. If you have entry-level auto-repair experience, you can tackle this task and get back to enjoying the convenience of power windows in your Chevy Tahoe in about an hour.

7 other answers

The power window controls attach to the motor and regulator via a wiring pigtail connector. Press the tab down to disconnect the pigtail then pull them apart to disconnect the motor. Be careful not to break the tab that holds the wiring harness together. Pull the pigtail apart at the clip, not on the wires.

There is a gear at the end of the power window motor which connects with the window regulator. When you press the up or down button on your door, it activates the window motor which then allows the window regulator to move the window. If you have a bad window motor, then the power to move the window will not exist.

SOURCE: 2004 Chevy Tahoe stereo wiring diagram. BLACK-ground RED-accessorie YELLOW-power 12v PURPLE-left rear GREEN-right rear WHITE-left front GREY-right front BLUE-REMOTE and the other blue one is for remote antenna.. Posted on Dec 04, 2008

This video shows how a window regulator and motors works in a car or truck. It also shows how easily they can break and why they have to be replaced. acedis...

Pull the door panel and find the wires to the motor. With a test light probe 1 wire then the other. 1 should be power while the other is ground while operating the switch and opposite for the other direction. If that's ok and the window doesnt move, smack the motor. If the switch is working and commanding the motor both ways, the motor is bad.

Install the 3 bolts to the window motor. Tighten Tighten the bolts to 5 N·m (44 lb in). Install the window, if removed. . Connect the wiring harness to the window regulator motor. Remove the window support. Connect the wire connector to the switch to inspect the operation of the window. Install the speaker. Install the water deflector.

Power Window problem of the 2009 Chevrolet Tahoe 1. The contact owns a 2009 Chevrolet Tahoe. The contact stated that the power windows and all four door locks failed when attempting to engage with the automatic key fob and the contact had to manually lock and unlock doors. The failure recurred intermittently.

Your Answer