Video answer: How to read your natural gas meter
Top best answers to the question «How do you read a gas meter»
To read correctly:
- Read the dials from left to right.
- If the pointer is between two numbers, always take the lower number.
- If the pointer falls between 9 and 0, write down 9.
- Ignore red dials, ones marked '100 per rev' and the largest dial.
Video answer: How to read your gas meter
7 other answers
To read an analog gas meter, start by looking at the dial on the far left and recording the number that the needle is pointing to. If the needle is between two numbers, choose the smaller number, even if the needle is closer to the
How to Read A Gas Meter The dials pictured above tell you how much gas you have used since the last reading. Most residential meters have four to six dials, numbered 0 through 9, on the front panel. The number of dials will depend on your gas company.
A gas dial meter has 4 or more dials. Each one turns to point to a number between 0 and 9. Each dial on your meter will turn in the opposite direction to the ones next to it. Some dial meters start with a clockwise dial and some start with an anticlockwise dial - check the direction of your dials before you read them.
See how much gas you are using by reading the meter. Also, provide your own readings on estimated months. Find what date to present the reading, mark the c... Also, provide your own readings on ...
To read the meter: press either of the buttons on your meter wait until you see ‘01’ with numbers followed by ‘M3’ write down the number from left to right ignore any zeroes at the beginning and any numbers after the decimal point
4.0.2 1 cubic metre = 35.3 cubic feet. If you’re wondering how to read your gas meter, or why you should, you’ve come to the right place. Your gas meter provides an indication of your household gas usage. It will display a series of digits, representing either cubic metres or cubic feet, depending on your gas meter type.
For a smart gas meter, do the following: Press 9 on the keypad. The word “VOLUME” will show on the screen. Your gas reading, in cubic metres (m3) will appear.