Video answer: How to light a gas fireplace pilot light with no ignitor
Top best answers to the question «Can you light gas logs with a lighter»
Flame-Lit Pilot LightLight a match or butane candle lighter and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. Pull the match or light away when the burner lights. You can adjust the flame height by turning the gas key.
Video answer: How to manually light a gas fireplace
10 other answers
A gas log lighter, on the other hand, has no built-in safety features and can only be installed in a vented wood-burning fireplace. It is an incredibly simple device consisting of a long gas pipe with holes along the top, capped at one end and connected to a gas line at the other. You open a nearby gas valve to operate it and use a match or other igniter to start a flame burning. If you open the valve and don’t immediately ignite a flame, the smell of gas around the fireplace ...
Once installed simply use the key to turn on the gas, light the gas with a fireplace lighter and place your logs on top of the log lighter until they catch fire. Just so, how do you light a gas log fireplace? You turn the control knob to the pilot position, push the knob in, light the pilot with a
How do you light a Weber gas grill with a lighter? Natural Gas Grills. Open the grill lid. Make sure all the burner control knobs are turned off… Turn the gas supply valve on. Put the match in the match stick holder and strike the match to light it… For current Genesis and Summit models, ignite the remaining burners the same way going from left to right. Can get my gas grill to light ...
Even if the igniter is broken, you can still light a gas stove with a match or lighter. Compared to cigarette lighters, matches are safer. A light match. The fire usually comes out of the holes in the center of the burner.
Try to light the gas as you would normally, but instead of pressing the piezo igniter button, use a long match or a long-reach butane lighter. If the grill lights and burns properly, you’ve got an ignition problem… If the grill doesn’t light using the match, check for low or no gas flow.
People Also Asked, How do i light the pilot on my gas logs? You turn the control knob to the pilot position, push the knob in, light the pilot with a match, then hold the knob down for 30 seconds or so until the pilot stays lit by itself. Once the pilot light will stay lit on its own, you can then move the knob to the “On” position.. Also know, do gas logs have a pilot light?
My advice is to light the lights and hold it close to the burner, then turn on the gas. If you turn on the gas and then have a problem flicking the lighters or something you may get a surprise burst of flame when the built-up gas finally catches. 2 level 1
Turn log lighter gas valve to the “off” position. Place logs on the fireplace grate allowing sufficient air space between logs for quick lighting. Light a long-stemmed fireplace match and hold it toward the center of the cast-iron burner ports. Turn the log lighter valve “on” gradually until ignition occurs.
Turn log lighter gas valve to the “off” position. Place logs on the fireplace grate allowing sufficient air space between logs for quick lighting.Light a long-stemmed fireplace match and hold it toward the center of the cast-iron burner ports. Turn the log lighter valve “on” gradually until ignition occurs.
After that, you can turn the burner knob to the ‘on’ position and adjust the flame as you like. If you are trying to relight the pilot light, before turning the knob to the pilot position, wait for some time until the gas smell goes away. If you follow these instructions, it is safe to light a pilot light using gas lighter.