Video answer: Adjusting the force of your gas spring
Top best answers to the question «Can you adjust gas struts»
Adjustable Gas Springs
Note that there is no approved way to increase the force on a gas strut as of yet, so always start out higher than you need, and slowly adjust downward from there.
Video answer: Pressure adjustment in gas springs with ace “de gas”
8 other answers
All standard, shrouded, multi-positional and stainless-steel gas struts are available in a VARI‐LIFT version which can be adjusted to meet individual preferences as well as being adjusted in‐situ. The gas struts are charged to their maximum force during manufacture.
For manufacturers and installers of gas struts and related hardware, ‘adjustable’ is usually taken to mean that the volume and pressure of gas contained in the strut can be reduced by the user via a valve or vent, such that progressively less force will be required to move the piston in or out.
How To Choose The Correct Gas Struts For The JobGas struts can be very dangerous, believe it or not there was a workplace death involving a faulty gas strut....
Place the strut assembly back into the strut tower and replace the strut tower bolts. Now you can tighten the bolts with your wrench, securing the strut assembly to the steering knuckle and torquing to the manufacturer's specifications. If you needed to move the sway bar or the brake line support, replace these at this time.
You can easily use our calculation tool. You can calculate and order the gas spring in just 4 simple steps: Step 1: Enter the details of your gas strut application. This step will check and simulate all details of the application. Step 2: Calculate the numbers. Now we will show you a circulated draft of what the gas strut will look like.
KYB Gas-a-just monotube shocks and struts instantly and automatically adjusts to your performance needs and never experiences fade due to aeration. Catalog Products
In the case of multiple gas struts adjust them in an alternating order to keep them equal. Fit the gas strut with the cylinder uppermost. The adjustment valve located at the uppermost end of the cylinder. Gas strut must be upright with the valve at the top and the rod pointing down during adjustment to avoid excessive loss of oil. A small mist of oil may be ejected from the valve during adjustment – this is normal.
We’re here to answer all your questions around the correct application of gas struts and dampers. From key terminology, an introduction to gas struts and our series of how to videos, to selecting the right product, sizing, customisation and our range of FAQs, our Help Centre contains all of the information you’re looking for.